Knowledge and support
Frequently asked questions
42 questions in 8 topics
Ask our team on WhatsApp (opens in a new tab)Model guidance on this page comes from Dimension Scope’s product data and data sheets, and our team confirms the right model for each vehicle before ordering. We quote no performance or emissions figures here; the reference is the test reports, published as issued.
About ECO MIZER
What is ECO MIZER?
ECO MIZER is Dimension Scope's family of fuel-treatment products for vehicles, designed to support more efficient combustion. Its products are units installed in the vehicle, not additives poured into the fuel tank. The family has two lines, KH.4 for gasoline engines and KH.5D for diesel engines, with three gasoline models and five diesel models. See the ECO MIZER models.
What is the difference between KH.4 and KH.5D?
The main difference is the fuel. KH.4 is for gasoline engines, with the models G40, G60 and G80 for 4, 6 and 8-cylinder engines. KH.5D is for diesel engines, with the models 100, 500, 1000, 2500 and 5000, from light vehicles and pickups to trucks and heavy machinery. Choose the line that matches your engine's fuel first, then the model.
Does ECO MIZER interfere with my vehicle's electronics, sensors or ECU?
ECO MIZER treats the fuel; it is not an electronic device and does not connect to the vehicle's computer. Because vehicles differ, send the make, model and year to our team before ordering and we will confirm that the model suits your vehicle.
How does ECO MIZER work?
ECO MIZER is a fuel-treatment product for vehicles. The unit is connected to the vehicle's fuel line: fuel enters through one fuel port, passes through the unit and leaves through the other. For the KH.4 G40, Dimension Scope describes it as a physical and mechanical treatment of the fuel inside the supply line, with the aim of influencing how the fuel flows and supporting more efficient combustion. We do not describe its internal design here beyond what the official documents state, and the fuel-flow animation on the homepage is an explanatory visualization, not an engineering drawing. The patent documents and test reports are published as issued on the Patents, Testing & Certifications page. For a specific technical question, send it to our team through the technical support form.
Choosing a model
How do I choose the right model for my vehicle?
First the fuel: gasoline engines take the KH.4 line and diesel engines the KH.5D line. Then the model: in KH.4 it follows the engine's number of cylinders, and in KH.5D the kind of vehicle or equipment. Our team confirms the right model for your vehicle before you order. Send your vehicle details on WhatsApp.
What is the difference between G40, G60 and G80?
They are the KH.4 models for gasoline engines, and each one suits a different engine layout:
- G40: vehicles with 4-cylinder engines.
- G60: vehicles with 6-cylinder engines.
- G80: vehicles with 8-cylinder engines.
The KH.4 data sheet also lists an engine size for each model, shown on its page. Our team confirms the right model for your vehicle before you order.
What is the difference between the KH.5D models?
KH.5D has five models for diesel engines: 100, 500, 1000, 2500 and 5000, in growing order.
- KH.5D 100: small diesel applications, such as small and light diesel vehicles, pickups and small transport vehicles.
- KH.5D 500: medium diesel applications, such as medium transport vehicles, buses, and medium equipment and machinery.
- KH.5D 1000: heavy diesel applications, such as trucks, heavy equipment and large machinery.
Fitment for KH.5D 2500 and 5000 is confirmed after our team reviews your vehicle or equipment details.
How do I find my engine's cylinders or engine size?
Both are usually in the owner's manual or in the manufacturer's specifications for your model. Engine size may be given in litres: a 2.0-litre engine is about 2,000 cc. If you are not sure, send our team the make, model and year of your vehicle, and the VIN if you have it, and we will check it with you.
My vehicle does not match these descriptions, or I am not sure. What should I do?
Do not choose by one description alone. Send your vehicle or equipment details on WhatsApp and our team will confirm the right model, or tell you if none of the current models suits it.
Is ECO MIZER suitable for hybrids, vehicles running on LPG or natural gas, or a particular make?
That depends on the vehicle, the engine and the fuel system. Dimension Scope's product data sets the models by fuel (gasoline or diesel) and by the engine's cylinders or the vehicle or equipment. Send your vehicle details to our team to confirm the right model before you order.
I drive a diesel pickup or a small transport vehicle. Which ECO MIZER is for me?
Diesel engines take the KH.5D line. Small and light diesel vehicles, pickups and small transport vehicles take the KH.5D 100; medium transport vehicles and buses the 500; trucks and heavy equipment the 1000. Send the make, model and year to our team and we will confirm the model before you order. See the ECO MIZER models.
My engine is modified or tuned. Can I still use ECO MIZER?
Modified and tuned engines vary widely, so we do not give a blanket answer. Send us the vehicle, the fuel and a short description of the modifications, and our team will tell you which model suits it, or whether it is better to discuss it first.
What details should I send before ordering?
To confirm the right model and arrange installation, send us:
- The make, model and year of the vehicle, or the type of equipment.
- The fuel: gasoline or diesel.
- The number of cylinders or the engine size, if you know them.
- The date of the vehicle's last scheduled service.
- Your city or region.
- Your name and mobile number.
For fleets, add the number and types of vehicles. Send the details on WhatsApp or through the purchase and installation form.
Installation
How is ECO MIZER installed?
Once our team has confirmed the right model for your vehicle, we arrange the installation date and place with you and explain beforehand what your vehicle needs. At installation, the unit's serial number and the installation date are registered, and the warranty starts from that date.
For the KH.4 G40, Dimension Scope's product data sets these points:
- It is installed in the fuel line to the engine, before the fuel reaches the injection system.
- It is mounted horizontally, by a qualified mechanic, using clamps and genuine, suitable fuel lines.
- After fitting, the installation is checked for leaks, fuel pressure and normal running.
For the other models, our team explains the installation for your vehicle. To start an order, use the purchase and installation form or message us on WhatsApp.
Can I install the unit myself?
We recommend arranging the installation with our team. The warranty starts from the registered installation date, covers manufacturing defects only, and does not cover damage caused by improper installation. Contact us before any installation so we can arrange it with you.
Does installation require modifying the vehicle, and how long does it take?
That depends on the vehicle, the engine and the fuel system, so we do not give one answer or a fixed time for every vehicle here. Our team explains what installation involves for your vehicle, and how long to expect, when the appointment is arranged. Send your vehicle details on WhatsApp to check before you order.
How should I prepare my vehicle before installation?
The vehicle must be in good running order and the whole fuel system clean before the unit is installed. We therefore recommend carrying out any scheduled service that is due and fixing any known engine or fuel-system fault before the appointment. If your vehicle is still under the manufacturer's warranty, check its terms first.
Use and care
Does the unit need periodic maintenance?
For the KH.4 G40, Dimension Scope's product data says the unit usually needs no routine maintenance; if it needs cleaning, air alone is used. For every model, what matters most is keeping the fuel system clean and servicing your vehicle as its manufacturer recommends. If you notice anything unusual, contact technical support and do not open the unit yourself: tampering voids the warranty.
How long does the unit last?
We do not state a specific service life for the unit here. What we commit to is a 12-month warranty from the registered installation date, covering manufacturing defects. For any question about your model, contact our team on WhatsApp.
Does ECO MIZER protect the engine or replace its maintenance?
ECO MIZER does not replace engine or fuel-system maintenance, so keep servicing your vehicle as its manufacturer recommends. We make no promise here about engine protection; the reference for any documented result is the test reports published as issued on the Patents, Testing & Certifications page, under the test conditions stated in each report.
Can the unit be moved to another vehicle?
Moving the unit to another vehicle or fitting it to a new engine voids the warranty, as does changing the engine of the registered vehicle. If you plan to sell your vehicle or change its engine, contact our team before taking any step.
Performance and measurement
What effect does ECO MIZER have on fuel consumption?
We quote no fuel-saving figure here and promise no specific result. The test reports are published as issued on the Patents, Testing & Certifications page, and each report covers the sample and test conditions it states. On your own vehicle the result depends on several factors, and you can measure it fairly yourself before and after installation.
Why do results vary from one vehicle to another?
Because any vehicle's fuel consumption depends on many factors, mainly:
- The vehicle, its engine and engine size.
- The condition of the engine and fuel system.
- Fuel quality.
- Driving style, road type and traffic.
- Load and number of passengers.
- Weather and air-conditioning use.
That is why we do not promise a specific result, and recommend a fair measurement on your own vehicle.
How do I measure fuel consumption fairly?
Use the full-tank method over several tanks, before and after installation:
- Fill the tank until the nozzle clicks off, and note the odometer reading.
- Drive as usual, refill the same way, and note the litres added and the odometer reading.
- Divide the distance driven by the litres to get kilometres per litre.
- Keep the same vehicle, route, driving style and fuel station.
- Compare the average of several tanks before installation with the average after it, not a single tank.
Do the engine and fuel-system condition affect the results?
Yes. The condition of the engine and fuel system is one of the biggest influences on fuel consumption. That is why the vehicle must be in good running order with a clean fuel system before installation, and why we recommend keeping up scheduled servicing afterwards. If the engine or fuel system has an existing fault, fix it first, so the comparison is not confused by the fault.
Does ECO MIZER reduce emissions?
We quote no emissions figure here and promise no specific result. The test reports published as issued on the Patents, Testing & Certifications page are the reference for any documented result, and each report covers the sample and test conditions it states. If you want to measure your vehicle's emissions, test them before and after installation with the same method at the same testing facility.
Warranty
How long is the ECO MIZER warranty?
The warranty runs for 12 months (one year) from the registered installation date. It covers manufacturing defects and is linked to the unit's serial number. The full terms are on the warranty page.
How do I register the warranty?
The warranty is registered with the unit's serial number, the vehicle details and the installation date. At installation, make sure the unit is registered with your vehicle's correct details, and keep the serial number. You can check your unit's warranty by serial number on the warranty page; to correct the registration details, message us on WhatsApp or use the warranty enquiry form.
Where do I find the unit's serial number?
The serial number is on the unit itself. Keep a clear photo of it together with the installation date. The number must stay legible and match the registered details: an unclear or mismatched serial number voids the warranty.
What does the warranty cover?
The warranty covers manufacturing defects only. It does not cover damage caused by:
- Improper installation, or installation that does not follow the manufacturer's installation instructions.
- Misuse or neglect of the product.
- Accidents.
If a manufacturing defect or non-conformity is confirmed, the unit is replaced at no extra cost. Details are on the warranty page.
When is the warranty void?
The warranty is void in these cases:
- Tampering with or modifying the unit, or deliberately damaging it.
- A serial number on the unit that is unclear or does not match the registered details.
- Changing the vehicle's engine, or fitting the unit to a new engine or another vehicle.
Does installing the unit affect my vehicle manufacturer's warranty?
Vehicle warranty terms differ from one manufacturer to another and may include conditions on add-on devices. Check your vehicle's warranty terms with the manufacturer or dealer before installing any add-on device, including ECO MIZER.
How do I make a warranty claim?
Message us on WhatsApp or use the warranty enquiry form, and include:
- The unit's serial number.
- The installation date and vehicle details.
- A description of the problem; you can send clear photos on WhatsApp.
Our team reviews the claim and contacts you with the next steps.
Certificates and reports
Where can I see ECO MIZER certificates and test reports?
We publish patents, intellectual-property documents and test reports as issued on the Patents, Testing & Certifications page, where you can view each document. Certificates will appear there once they are published.
Are there patents for ECO MIZER?
The Lebanese patent documents relating to the KH.4 and KH.5D devices are published as they are on the Patents, Testing & Certifications page. The same page shows idea-deposit certificates and forms from the Arab Federation for the Protection of Intellectual Property Rights; these are deposits, not patents. Refer to each document for its holder, number, date and scope.
Do test-report results apply to my vehicle?
Each test report covers the sample and test conditions it states, so the result on your vehicle may differ. Read the test conditions in each report, and measure the result on your own vehicle fairly before and after installation.
Buying, service and partnerships
Do you sell and install ECO MIZER across Saudi Arabia?
Yes. Dimension Scope sells its products directly and coordinates installation and service itself for customers in every region of Saudi Arabia. Our factory is in the Industrial Area, Dammam (location on the map). Start your order on WhatsApp or through the purchase and installation form.
How much does ECO MIZER cost, and how is it delivered?
We confirm the price once the right model for your vehicle is known. We do not quote fixed shipping times or costs here: delivery and installation are arranged with each customer according to their location. Send your vehicle details and city on WhatsApp, and our team will give you the current price and order details.
We run a vehicle fleet. How do we work with you?
Fleet and company requests come through the fleet and company enquiry form. Include the number and types of vehicles, the fuel, the engine cylinders or sizes if available, and the cities your vehicles operate in. Our team reviews the request and contacts you to confirm the right models and arrange installation.
We are a business interested in cooperation or supply. How do we start?
Dimension Scope welcomes enquiries from service centres, automotive retailers and commercial organisations interested in its products. Send your request through the commercial partnerships and supply form with your organisation's name, activity and city. The details of cooperation and supply are discussed directly with our team, to suit each organisation.
I run a workshop. Can I install ECO MIZER for my customers?
Dimension Scope sells and coordinates installation and service itself across Saudi Arabia, and has no distributors at present. Workshops and service centres that want to work with us can send an enquiry through the commercial partnerships and supply form, and our team will discuss it directly.
How do I contact your team or technical support?
Message us on WhatsApp at +966 53 981 9992, or send an enquiry from the contact page. For technical support after installation, use the technical support form and include the unit's serial number, the vehicle details and a description of what you noticed. If you notice anything unusual in the vehicle after installation, do not open the unit yourself; contact us first.
Question not answered?
Ask our team directly.
Send your vehicle details and your question, and the Dimension Scope team will get back to you.
- Warranty policy 12 months from the registered installation date, checked by serial number.
- Patents, Testing & Certifications Patents, intellectual-property documents and test reports, published as issued.
- Send an enquiry Orders and installation, technical support, fleets and partnerships.
- WhatsApp Talk to our team directly. (opens in a new tab)